Xiaomi Mi Wifi Router 3C White: Full Specifications, Photo


Xiaongươi Mi WiFi Router 3C is 802.11n wireless router based on the MediaTek MT7628N SoC. It has three Ethernet ports & one radio (2T2R MiMo).

Bạn đang xem: Xiaomi mi wifi router 3c white: full specifications, photo

BrandModelVersionCurrent ReleaseOEM InfoForum SearchTechnical Data
XiaomiMiWifi 3C22.03.2https://xiaomi-mi.com/wifi-routers/xiaomi-mi-wifi-router-3c-white/MiWifi 3CView/Edit data

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
MiWifi 3CMediaTek MT7628AN5751664MediaTek MT7628ANb/g/n-3---

ModelVersionCurrent ReleaseFirmware longmon.vn snapshot InstallFirmware longmon.vn snapshot UpgradeFirmware OEM Stock
MiWifi 3C22.03.2https://downloads.longmon.vn/snapshots/targets/ramips/mt76x8/longmon.vn-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.binhttp://¿

1. Use longmon.vnInvasion method khổng lồ gain telnet access.https://github.com/acecilia/longmon.vnInvasion(IP: - Username: root - Password: root)

2. Connect to lớn router using telnet.

3. Backup all partitions using command:

dd if=/dev/mtd0 of=/tmp/mtd0Copy /tmp/mtd0 khổng lồ computer using ftp.

4. Copy longmon.vn-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysupgrade.binkhổng lồ /tmp in router using ftp.

5. İnstall longmon.vn to lớn OS1 và không tính tiền OS2.

Xem thêm: Sa N Andreas: Multiplayer - Grand Theft Auto: San Andreas

mtd erase OS1mtd erase OS2mtd -r write /tmp/longmon.vn-ramips-mt76x8-xiaomi_miwifi-3c-squashfs-sysnâng cấp.bin OS1Limitations: For the first install the image kích thước needs lớn be lessthan 7733248 bits.

Commit page:3c97fb4346d11ab3.

Instruction phối Vendor bootloader System-On-Chip CPU
575 MHz Flash kích cỡ Flash CPU RAM kích cỡ RAM CPU Wireless No1 switch Serial
U-Boot + Xiaomày U-Boot
Mediatek MT7628N
16MB NorFlash
Spansion S34ML01G100TF100 Winbond W25Q128JV
64 MiB DDR2
800 Mhz
SoC-integrated: MT7628N 2×2 MIMO 802.11b/g/n (2.4 GHz)
MT7620 built-in 10/100 switch w/ vlan support


→ port.serial general information about the serial port, serial port cable, etc.

Attaching 3 pins to J1 & connecting with a USB to lớn TTL (CP2102 module) on COM4 115200bps using Putty consoleFrom the COM 4:

1 —— VCC (3.3V) (DO NOT CONNECT!)2 —— RX3 —— GND4 —— TXSerial port works in one-way only (no đầu vào going through pin4).